A standby generator installation typically involves five main stages: an initial site visit and electrical load assessment, permitting, site preparation, electrical and fuel connections, and final inspection and startup. While the installation timeline varies depending on the property, equipment, permitting requirements, and project scope, much of the preparation takes place before installation begins.
Power outages in North Florida aren’t limited to hurricane season. Summer thunderstorms, unexpected utility interruptions, and severe weather can leave homeowners without essential systems such as air conditioning, refrigeration, and well pumps.
A professionally installed standby generator can provide automatic backup power when utility electricity is interrupted, helping keep your home comfortable and essential equipment operating.
If you’re considering a standby generator, schedule a free estimate with Holly Electric to discuss your home’s backup power needs.
Holly Electric works with leading generator brands, including KOHLER, Generac, and Cummins, offering homeowners options based on their electrical requirements and preferences.
What Happens at the First Site Visit?
The initial site visit is an important part of planning a standby generator installation. During this appointment, our team evaluates your property’s electrical setup, discusses your backup power priorities, and helps determine an appropriate generator solution.
A good site assessment includes:
- Your electrical panel and service capacity. Reviewing the existing electrical panel, service size, and potential location for the automatic transfer switch.
- Electrical load assessment. Evaluating which appliances and systems you want to operate during an outage, including air conditioning, refrigeration, well pumps, and other essential equipment. Equipment with high starting demands may affect generator sizing.
- Fuel requirements. Determining whether natural gas or propane is available and evaluating the fuel supply requirements for the proposed generator.
- Generator placement. Identifying a suitable outdoor location that meets manufacturer installation instructions, applicable electrical and building codes, and required clearances from windows, doors, vents, and property boundaries.
The site visit is also a great opportunity to discuss the difference between whole-home backup power and essential-circuit coverage. Our team can help explain the options based on your home’s electrical demands, available space, and budget.
What Do You Need to Decide Before Install Day?
A few decisions shape the whole job. Most homeowners make them during or right after the estimate.
- Whole home or essential circuits. A properly sized whole-home generator can provide backup power to your home’s electrical system, while a smaller unit can support selected essential circuits.
- Natural gas or propane. Propane is an option for homes without natural gas access, provided the property meets tank placement, fuel supply, and installation requirements.
- The brand and model. We recommend a generator based on your home’s electrical needs, ensuring the selected brand and model are suitable for your property.
- Where the unit sits. Closer to the panel and fuel source usually means a simpler install, but code clearances and your preference (noise near a bedroom window, the view from the patio) matter too.
- Add-ons. Some homeowners pair the install with whole-home surge protection since an electrician is already working in the panel. Others sign up for a maintenance plan at the same time.
Each of these choices also moves the price, and whole house generator cost installed depends most on unit size, fuel type, the transfer switch, and site work.
Do You Need a Permit for a Standby Generator?
Yes. A permanently installed standby generator generally requires permits and inspections from the local building department. Electrical and fuel connections must be completed by appropriately licensed professionals.
Some things to know about this stage:
- Permits and inspections. We handle the permitting process and coordinate the required inspections, so homeowners don’t have to manage these steps themselves.
- Placement requirements. Generator placement must comply with manufacturer specifications, applicable local codes, and safety standards, including NFPA 37 where applicable.
- HOA approval can add a step. If your property belongs to a homeowners association, additional approval may be required before installation.
- Licensed contractors. Generator installations should be performed by properly licensed professionals. Florida homeowners can verify contractor licenses through the DBPR license search (opens in a new window). We’re licensed in Florida and Georgia.
Permit processing times vary depending on the local building department, project requirements, and equipment availability. Our team will discuss the expected timeline during the planning process.
How Is the Site Prepared?
Site preparation typically involves three important steps:
- The pad. The generator is installed on a stable, level base, such as a composite or concrete pad, depending on the generator model and site requirements. Proper placement helps support safe operation and drainage.
- Utility locates. Before digging for electrical conduit or fuel lines, underground utilities must be identified. In Florida, utility locating services can be requested through 811.
- The fuel side. For natural gas, the utility provider may need to verify meter capacity or arrange an upgrade. For propane, an appropriately sized tank and fuel line must be installed, with sufficient fuel available before startup.
Fuel-related work may require coordination with utility companies or propane suppliers, which can affect the installation schedule.
What Happens on Installation Day?
Install day is the part people picture, and it’s usually the shortest stage. Here’s the typical order of work:
- Set the generator. The crew places the unit on the pad, levels it, and secures it.
- Mount the automatic transfer switch. On most homes the transfer switch goes in next to the main panel. Some setups use a service-rated switch at the meter that also acts as the main disconnect.
- Run the wiring. Electrical conduit, power wiring, and control wiring are installed between the generator and transfer switch.
- Connect the fuel. The natural gas or propane line is connected to the generator with the shutoff valve and fittings the manufacturer calls for.
- Connect to the electrical system. A temporary power interruption is typically required during the electrical connection. Our team will discuss the expected duration with you before installation.
- Clean up. The crew backfills applicable trenches and clears the work area.
Do you need to be home? Someone may need to be available during certain stages of installation, particularly when access to the electrical panel is required. Our team will explain any access or scheduling requirements before installation day.
How Does a Whole House Generator Work Once It’s Installed?
It helps to know what you’re buying before the startup walkthrough. A whole house generator works as a team with its automatic transfer switch.
When utility power drops, the transfer switch senses it within seconds and signals the generator to start. Once the engine is up to speed, the switch disconnects your home from the utility lines and connects it to the generator. When utility power comes back and holds steady, the switch moves you back to the grid and the generator runs a short cool-down before shutting off.
That disconnect step is the safety piece. It keeps generator power from flowing back onto the utility lines, where it could hurt a lineworker. It’s also why connecting a standby generator to a panel is licensed, permitted work under the National Electrical Code (opens in a new window), and never a DIY project.
How Do Inspection and Startup Work?
After installation, the required inspections are coordinated with the local building department. Depending on the jurisdiction, electrical and fuel system inspections may be conducted separately.
Once the system is ready for commissioning, the technician completes the manufacturer’s recommended startup procedures, which typically include:
- The manufacturer’s startup procedure. Checking fluid levels, system settings, and generator operation according to manufacturer specifications.
- A switchover demonstration. The technician starts the system and demonstrates the switchover, so you can see the transfer switch move the house to generator power and back to the utility.
- The exercise schedule. Standby generators run a short self-test on a regular schedule to keep the engine ready. The exercise schedule can usually be set for a quiet time, when the noise won’t bother anyone.
- Customer walkthrough. You learn the controller, what the status lights mean, how to shut the unit off for service, and what to do if it shows a fault. Many newer units also offer remote monitoring through an app, depending on the brand.
Before the technician leaves, homeowners should also confirm how their generator’s manufacturer warranty is registered and any applicable registration deadlines.
How Long Does Standby Generator Installation Take?
The overall installation timeline varies depending on permitting, equipment availability, site preparation, and coordination with utility or fuel providers.
While the physical installation may take only a few days for some homes, the complete process can take longer. Our team will provide an estimated project timeline based on your home’s specific requirements.
| Stage | What happens | What you do |
|---|---|---|
| Site visit | Load calculation, panel check, fuel and placement review | Walk the property with us and decide what to back up |
| Decisions and estimate | Unit size, fuel, brand, location, add-ons | Approve the estimate |
| Required permits | Contractor applies for electrical and fuel permits | Get HOA approval if needed |
| Site prep | Pad, utility locates, gas meter or propane tank work | Keep the area clear |
| Install day | Generator set, transfer switch, wiring, fuel, panel tie-in | Be prepared for a temporary power interruption |
| Inspection | Building department checks the work | Provide access if asked |
| Startup | Test run, switchover demonstration, exercise schedule, walkthrough | Learn the controller and ask questions |
What Happens After the Installation?
A standby generator needs regular maintenance to remain ready when an outage occurs. Routine servicing includes checking the oil, filters, battery, and transfer switch according to the manufacturer’s recommended schedule.
Homeowners can perform basic generator maintenance checks between professional service visits.
For added convenience, our generator maintenance plans help keep your generator’s scheduled service on track.
Frequently Asked Questions
How long does a standby generator installation take?
Installation timelines vary depending on permits, equipment availability, site conditions, and utility coordination. Our team will provide an estimated timeline based on your project.
Can I install a standby generator myself?
Standby generator installation requires professional electrical and fuel connections, along with applicable permits and inspections. Hiring properly licensed contractors helps ensure safety and code compliance.
Will my power be off during the installation?
A temporary power interruption is typically necessary during electrical connections. Our team will discuss the expected duration before installation.
Do I need to be home on installation day?
Someone may need to be available to provide access to the electrical panel or other areas. Our team will confirm any requirements before the scheduled installation.
How much does standby generator installation cost?
Costs depend on generator size, fuel type, transfer switch, and site preparation requirements. Request a free estimate for pricing specific to your home.
Plan Your Generator Installation With Us
Holly Electric is a family-owned company based in Lake City, Florida, proudly serving North Central Florida, including Gainesville, Ocala, and surrounding communities. In addition to standby generator installation and maintenance, we provide comprehensive residential and commercial electrical services.
We install and service leading generator brands, including KOHLER, Generac, and Cummins. As a KOHLER Titanium Tier Dealer, we’re committed to providing reliable generator solutions and professional service.
Ready to protect your home or business from unexpected power outages? Request a free estimate and let our team help you find the right backup power solution.